The site is currently CLOSED!
Please try again at a later date.

Change language





Payment solution

Most popular products

Recommended products

Change currency


SSL Certificate


    Address:        József Attila utca 55/B 
                         H-2011 Budakalász, Hungary
    Phone:           +36-26-340009


Product Details

Skyliner ARF 1990 mm - Aeronaut

Stock: In stock
Skyliner ARF 1990 mm - Aeronaut
  • Skyliner ARF 1990 mm - Aeronaut
  • Skyliner ARF 1990 mm - Aeronaut
82 490 Ft
Skyliner ARF 1990 mm - Aeronaut
  • Skyliner ARF 1990 mm - Aeronaut

    Skyliner is an ARF model ideal for the advanced beginner and hobby pilot. The kit includes a high-quality GRP fuselage, GRP-reinforced balsa/foam wings and a balsa tail plane. Wings, tailplane and rudder are covered with Oracover. You just install servos, otor and RC equipment and the model is ready to fly. Servo trays are included in the kit.
    Skyliner can be build with or without motor. The fuselage is marked to be cut off where the spinner fits best, if a motor is to be installed.
    With a wing span of 2 meters the model is well suited for slope soaring and also for contest flying in one of the established model flying associations.
    Skyliner is not a dedicated thermal soarer; the specially designed wing section makes the model reasonably fast and agile, so that you will enjoy many hours of flying under almost any conditions.

    The kit contains:

    White GRP-fulselage, covere wings and tailplane, servo tray, control linkages, canopy, small parts, decals, building instructions.


    Wingspan [mm] 1.990
    Length [mm] 1.150
    Weight [g] 1.500
    Wing profile SD7037
    RC-functions: elevator, rudder, ailerons (2 servos), optional: motor

    Recommended accessories - not included:

    Remote controll set with min. 4/5 channels incl. receiver
    Motor: brushless Outrunner, as of 250W, d: 28 mm, 1000-1300 kv
    Controller: brushless, as of 30A
    Battery: 3s Lipo, 1800 - 2600 mAh
    Folding Propeller: depending on motor choice approx. 9x5" - 10x6"
    CN-Spinner: d: 40 mm
    Center piece: 42 mm
    Servos: 4x 10-12mm approx. 12 - 19g

  • Producer/Distributor
    Producer/Distributor item number
    Country of origin
    In stock
    Article No.