The site is currently CLOSED!
Please try again at a later date.

Change language

HungarianEnglishDeutsch

Categories

Newsletter

RCHUNGARY @ www

Payment solution

Most popular products

Recommended products

Change currency

Certificate

SSL Certificate

    Contact                                                                 

    Address:        József Attila utca 55/B 
                         H-2011 Budakalász, Hungary
    Phone:           +36-26-340009
    E-mail:            webshop@rchungary.com

   

Product Details



Carbon rod 6,0 x 1000 mm

Stock: In stock
Carbon rod 6,0 x 1000 mm
3 070 Ft
Carbon rod 6,0 x 1000 mm

Weight: approx. 42 g
  • Carbon rod 6,0 x 1000 mm

    Pultruded (epoxy matrix) carbon fibre profiles made from HT carbon fibres (Torayca® T300 or equivalent) are drawn continuously through a die. This production method causes the fibres to be oriented unidirectionally, i.e. along the length of the pultruded form. The result is a high fibre volume fraction of 58 % with very little air voids content.
    Heat distortion temperature: 120 °C

    Please note:
    Internal release agents are used in the pultrusion process, which migrate to the part's surface. A pre-treatment of the adherent due to this is necessary. These have to be roughened (abrasive paper 220 grit) and cleaned very thoroughly. Epoxy resin or cyanacrylate (superglue) is used for the bonding itself.

  • Producer/Distributor
    R&G
    Producer/Distributor item number
    700060
    Stock
    In stock
    Article No.
    111700060