The site is currently CLOSED!
Please try again at a later date.

Change language





Payment solution

Most popular products

Recommended products

Change currency


SSL Certificate


    Address:        József Attila utca 55/B 
                         H-2011 Budakalász, Hungary
    Phone:           +36-26-340009


Product Details

HOTT General Air-Modul 2-6s Vario Graupner

Stock: In stock
HOTT General Air-Modul 2-6s Vario Graupner
  • HOTT General Air-Modul 2-6s Vario Graupner
25 290 Ft
HOTT General Air-Modul 2-6s Vario Graupner

General sensor for Graupner HoTT receivers and models with combustion or electric motor:
  • HOTT General Air-Modul 2-6s Vario Graupner


    Vario with altitude signals and 5 climb and 5 drop sounds, plus additional warning thresholds for min. altitude, max. altitude, climb and drop speeds in two stages
    Altitude display (- 500 ... + 3000 m) and storage of the min. and max. altitude.
    2x temperature and voltage measurements with warning thresholds for min. and max. voltage and min. and max. temperature
    Single cell measurement with warning thresholds for min. voltage
    Voltage, current and capacity measurement with warning thresholds for min. and max. voltage, max. capacity and max. current
    Programmable current limiting
    Current limiting with shunt resistors 2x 1 mOhm parallel = 0.5 mOhm
    Rotational speed measurement and warning thresholds for min. and max. rotational speed
    Fuel measurement with warning thresholds in 25% increments (after software update).
    Adjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always
    Adjustable warning repetition time: Always, 1, 2, 3, 4, 5 min, once

    Important Note when using the modules 33600, 33601, 33610, 33611 and 33620:
    Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it!
    If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst Case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensor is powered on.

    Connections and Technical data Vario:

    2x temperature selectively 0 to 120°C or 200°C and voltage measurement up to 60 V DC
    1x rotational speed measurement up to 100,000 rpm with a two-blade propeller
    1x speed controller/servo input, 1x rotational speed regulation input, 1x speed controller/servo output for rotational speed regulation
    1x current and voltage and capacity measurement up to 40 A (pulse 1 s: 60 A) and up to 30 V
    1x single cell monitoring for 2 - 6S lithium batteries (LiPo, LiIo, LiFe)
    1x receiver power supply input and output
    1x telemetry connection for receiver
    1x fuel sensor 0%/25%/50%/75%/100%
    Altitude measurement: -500 m ... +3000 m
    Resolution: 0.1m
    Vario sensitivity: 0.5 m/3 s, 1 m/3 s, 0.5 m/s, 1 m/1 s, 3 m/s programmable by tone
    Average calculation: 4 - 20 measurements programmable per measurement value


    All-up weight, approx.: 31 g
    Dimensions (LxWxH): 41 (48) x 44 (56) x 16 mm
    Operating voltage : 3,6 ... 8,4 V

  • Producer/Distributor
    Producer/Distributor item number
    In stock
    Article No.