Details
Power MULTIlight Multiplex
Some like it bright! The POWER-MULTIlight is the first choice when you wish to fit out your model aircraft with a more realistic lighting system. The switchable landing light, navigation and anti-collision lights endow your model with a highly authentic look. The nine ultra-bright 8 mm LEDs are pre-wired (cable length per LED 1 m) and fitted with connectors, making installation very easy.
The POWER-MULTIlight is suitable for power models of around 1300 mm wingspan or larger, 500-size helicopters and larger, and model jets.
The following functions can be switched from the RC system transmitter.
1. Everything OFF
2. Navigation lights and anti-collision light ON
3. Navigation lights, anti-collision light and landing light ON
All functions are permanently ON if the system is connected directly to a power source.
If you wish to control the lighting system from the transmitter, a three-position switch and one free channel are required. Compatible with all RC systems.
- Nine LEDs, completely pre-wired: 2 x white double-flash, 2 x flashing red, 2 x white landing light, 1 x constant red, 1 x constant green, 1 x constant white
- Landing light and position lights can be switched on and off from the transmitter
- Low weight
- Ultra-bright LEDs
Specification
Current drain: 1.45 A
Input voltage range: 7.4 ~ 12.6 V
LED outputs: 9
LED output voltages: Red LEDs: 2.3 V, white LEDs: 3.2 V, green LED: 3.2 V
Total output power: 4.5 W
Power of single LED: 500 mW
Case dimensions: 67 x 41 x 19.2 mm
Size of LEDs: 8 mm Ø, 8 mm high
Socket: JST (red BEC socket)
Switched functions: Everything OFF / Navigation lights and anti-collision light ON / Navigation lights, anti-collision light and landing light ON. If connected directly to the power source / battery all functions are permanently ON
Weight of control unit: 35 g
Total weight incl. all LEDs and leads: 55 ~ 60 g
