Details
Futaba MPDX-1 Multiprop Decoder
The Futaba MPDX-1 Multi-Prop Decoder is used to expand a single receiver channel signal, to up to eight channels. Simply connect the decoder to the receiver on Futaba 32MZ, 18MZ, 14MZ, FX-40, 12Z and 12FG systems.
Multi-prop channels have the following differences from normal linear channels:
The resolution of the multi-prop channel is lower than that of the linear channel.
Operating multiple multi-prop channels simultaneously may reduce the operation response of the multi-prop channel.
Multi-prop channels can not use the mixing function.
Features:
Servo operation of 8 channels is possible from one single channel
Linear operation is possible
The servo operation speed of each channel can be set
Fail safe setting of each channel is possible
Operation control setting, direction of operation change, and travel adjustment are possible for each multi-prop expanded channel (Transmitter side setting)
32MZ Multi-prop function is a function that divides one channel into eight channels and extends the number of channels. Up to two MPDX-1 can be used, and up to 32 channels can be expanded as follows:
Linear channel 14 channels (2 channels are used by multi-prop function)
On/Off channel - 2 channels
Multi-prop channels - 16 channels
Specifications:
Operation power requirement: 4.8 or 6.0V (4~5 NiCad batteries)
Current drain: 7.5mA
Number of multi-prop output channels: 8
Applicable modulation modes: PCM G3, PCM1024, PPM
Multiplexing scheme: Pulse width division (PCM G3, PCM1024), time division (PPM)
Delay function: Programmable for each channel
Fail-safe function: F/S function/HOLD function can be selected for each channel
Dimensions: 29.6x39.3x15.8mm
Weight: 14.2g
NOT INCLUDED - needed to operate: 4.8V or 6.0V battery and switch
